Ed Donaldson Hardware Restorations Bin Pulls2

Reference # 444-215

1 set of 6 available

Note: Sale of this item is not complete until you receive confirmation from us.

A set of 6 early brown swirl style mineral drawer knobs or door pulls, circa 1870. Pulls measure 1 1/2" diameter at the base and 1 7/8" diameter across the top and extend 1" when mounted. The integral threaded wood screws are solid and complete with nuts. Due to the way this type of knob was made, each one is individual and are very similar but not necessarily identical in swirls. Set is in excellent condition - one pull has a small chip on the edge of the base which has been there for a long time - other than that they have no cracks or chips and the tops are not chipped or damaged.

Reference # 444-233

1 pair available
Note: Sale of this item is not complete until you receive confirmation from us.

Original bin or drawer pulls in plain cast iron, circa 1895. Measures 2 7/8" x 1 3/8" high overall with a 2 1/2" on center measurement. Restored and complete with slotted wood screws.

Reference # 444-940

1 pair available

Note: Sale of this item is not complete until you receive confirmation from us.

Pair of Victorian cast iron decorative bin pulls or drawer pulls, manufactured circa 1885, with acanthus leaf decoration. Pulls measure 3 3/4" x 1 1/2" overall. Measurement from hole center to hole center is 3 1/16". Restored and ready to install - complete with screws.

Reference # 444-216

one lot of 60 available

Note: Sale of this item is not complete until you receive confirmation from us.

Lot of 60 small porcelain pulls from late 19th - early 20th century. Pulls are all similar but not exact matches although some match each other. Measuring approx. 3/4" diameter across the top and 1/2" diameter across the bases. The small wood screws are leaded into the back and are 1/4" to 3/8" extension. Some pulls are age discolored and vary in look as shown in photo below.

Reference # 444-229

1 set of 3 available

Note: Sale of this item is not complete until you receive confirmation from us.

A set of 3 molded glass pulls, from the mid-19th century, circa 1850. Pulls measure 1 1/4" diameter across the top and extend 1" from the base. Screw bolts screw into the pulls to mount and extend 1 1/8" - complete with nuts. Glass is in remarkable condition for the age with no major damage.

Reference # 444-228

1 pair available

Note: Sale of this item is not complete until you receive confirmation from us.

A small pair of early molded glass pulls, from the early to mid-19th century. Pulls measure 1 1/8" diameter across the top and extend 1 1/8" from the 7/8" diameter base. Very old glass is in remarkable condition with no major damage - slight chipping around the stud holes.