Ed Donaldson Hardware Restorations Cupboard Latches

Reference # 444-305

1 pair available

Note: Sale of this item is not complete until you receive confirmation from us.

Antique decorative Victorian pull handle cupboard catches in cast bronze, circa 1880. Back plate measures 3 5/8" x 7/8" and the handle is 2 1/8" and extends 1 1/8". When pulled, the bottom of the handle comes out and lowers the inside catch shown in side view below. The catch keepers, pictured with latches below, mount on the underside of interior shelf. Latch is shown in mounted position above. Restored and complete with screws.

Reference # 444-209

1 pair available

Note: Sale of this item is not complete until you receive confirmation from us.

Victorian cupboard latches in decorative cast iron with decorative cast bronze knobs (5/8"), circa 1885. Latch is a surface mount, spring loaded catch. Measuring 1 7/16" high x 2" deep without the 1 7/16" x 1" keeper. Restored and complete, ready to install - complete with screws. Close-up shown below.
NOTE: These latches may be used for closets or small storage areas, but caution should be used if the area is large enough to walk into, as there is no access to release this latch from the inside.

1 each available

Note: Sale of this item is not complete until you receive confirmation from us.

Ref. 444-219

Three examples of early Colonial cupboard spring catches in wrought iron, complete with original catches which mount underneath an inside self. Ref. 444-217 measures a 7" extension x 1 1/4" wide tapering to 3/4" - catch extends 1". Ref. 444-218 measures a 5 1/2" extension x 3/4" - catch extends 7/8". Ref. 444-219 measures a 6 1/2" extension x 1 1/4" wide tapering to 3/4" - catch extends 1 1/2".

Colonial Period Cupboard Spring Catches, Complete
Price $ 35.00 each

Reference # 444-111

1 pair available

Note: Sale of this item is not complete until you receive confirmation from us.

Victorian cupboard latches in decorative cast iron with decorative cast iron knob (1/2"), circa 1885. Latch is a surface mount, spring loaded catch. Measuring 1 1/2" x 1 5/16" without the 1 1/2" x 1/2" keeper. Restored and complete, ready to install - complete with screws. Close-up shown below. NOTE: These latches may be used for closets or small storage areas, but caution should be used if the area is large enough to walk into, as there is no access to release this latch from the inside.

Reference # 444-226

1 pair available
Note: Sale of this item is not complete until you receive confirmation from us.

Antique decorative Victorian pull handle cupboard catches in cast iron, circa 1875. Back plate measures 3 5/8" x 7/8" and the handle is 2 1/4" and extends 1 1/8". When pulled, the bottom of the handle comes out and lowers the inside catch shown from the side above. The catch keepers, pictured with latches below left, mount on the underside of interior shelf. Latch is shown in mounted position above and side view below. Restored and complete with screws.

Reference # 444-321

1 available

Note: Sale of this item is not complete until you receive confirmation from us.

An early original single Victorian cupboard latch in decorative cast iron with iron knob, patent on the underside of 1871. Latch is a surface mount, spring loaded catch measuring 2 1/16" x 2 1/8" deep without the 1" additional keeper. Latch is ready to install - complete with screws. Close-up below.

Reference # 444-304

One pair available

Note: Sale of this item is not complete until you receive confirmation from us.

Pair of Victorian rams head covered furniture or cabinet key escutcheons in brass. Measuring 1 1/2" x 1 1/2", the pressed brass cover is hinged at the top and lifts to reveal the keyhole as shown below right. Keyhole measures 11/16" high x 1/4" at widest. Original patina. Close-up below left shows detail.