Ed Donaldson Hardware Restorations Hinges

Cast iron tight pin butt hinges manufactured 3rd quarter of the 19th century. This type of hinge is manufactured in one piece and can be used on either side of the door and are not handed. The hinges measures 3" high x 2" wide across the back, five knuckles, and each leaf having 3 mount holes. Restored and in excellent condition. Complete with slotted mounting screws.

Early tight pin cast iron butt hinges for doors, manufactured circa 1860, and signed Baldwin Patent. This is not the modern Baldwin Hardware Mfg. Co. but Baldwin Company in Middletown, Connecticut founded in the 1840's and out of business in the 1860's. Restored hinges measure 3" x 2 1/4". Complete with slotted wood screws.

A pair of small size Hudson Valley wrought iron half strap hinges appropriate for a cupboard, chimney cupboard, or small door, from the late 18th - early 19th century. Hinges measure 6" extension x 1 1/4" at widest mount area. Featuring rat-tail drive-in pintles that are 2 3/4" high overall and drive-in 2". Hinges have not been recently restored and are in an aged patina. In excellent condition and nicely made. Close-ups below shows one rounded terminal end has been broken out a long time ago, but is still very usable.

Arts and Crafts wrought iron frog leg hinges, measuring 9" high x 4 3/4" wide. The knuckles are 2 1/2" high and have some wear as shown in photos below, however, the hinges are still quite usable. Restored to black finish.

Victorian cast iron steeple tip loose pin butt hinges manufactured during the last quarter of the 19th century. The top pin can be removed and the hinge becomes two pieces for mounting purposes. This type of hinge can be used on either side of the door and are not handed. Measuring 2 1/2" x 2 1/2" this size was usually used on cupboards or small doors. Restored and in excellent condition.

Reference # 500-509

1 pair available

Note: Sale of this item is not complete until you receive confirmation from us.

Wrought iron strap lift-lid box hinges, circa 1830. Hinges measure 13" over with approximately 7 1/2" on each side of the knuckle. Mount side is stepped for box application as shown below from side view.

Lift-Lid Box Hinges, 1830
Price $ 125.00 pair

Reference # 500-633

1 pair available

(as pictured)

Note: Sale of this item is not complete until you receive confirmation from us.

Colonial Revival surface mount English frog leg hinges, circa 1930-40. Originals of this type of hinge were made in England and widely used there and in America during Colonial times. Hinges measure 5" high x 3" and are marked on the back "made in England".

Colonial Revival Frog Leg Hinges
Price $ 24.00 pair

Reference # 500-874

Note: Sale of this item is not complete until you receive confirmation from us.

Early original wrought iron H hinges from the late 18th or early 19th century. Hinges measure 12" high x 3 1/4" across the H and 4" high at knuckle. The joints are in good condition - hinges are not newly restored and surface is in aged black finish.

Wrought Iron H Hinges
Price $ 125.00 pair

Reference 500-459

1 pair available

Note: Sale of this item is not complete until you receive confirmation from us.

Arts and Crafts style modified strap hinge, operating with a drive-in pintle that the hinges pivot on. Hinges are heavy wrought steel and measure 12 1/2" high and extend 6". Drive-in spikes are 4 1/2" and the pintle is 9" high with a very unique extended tail shown below. Restored and refinished in a flat black finish - complete and ready to install.

Arts & Crafts Modified Strap Hinges
Price $ 60.00

Reference # 500-019

Reference # 500-018

Reference # 500-992

Reference # 500-893

1 pair available

Reference # 500-924

Reference # 500-509

Reference # 500-633

Reference # 500-874

Reference 500-459