[Rim (Box) Locks] [Mortise Locks] [Pocket Door Locks] [Thumb Latches] [Window Hardware] [Bolts] [Door Bells & Knockers] [Miscellaneous Hardware] (Hinges)

HINGES
Page 10  

Reference # 500-100 1 pair available Note: Sale of this item is not complete until you receive confirmation from us. Quantity:

Early pair of  19th century wrought iron strap hinges - a small size for a small door.  Close-ups below show the ball terminals and the pintles with a threaded mount.  These hinges were nicely made measuring 7" overall x 11/16" at widest at the joint - tapering down to 1/4" and a ball terminal 11/16" in diameter.  Pintles measure 2 3/4" overall with the threaded mount 1 1/2".  These hinges have not been restored and have original aged finish intact.

19th Century Wrought Iron Strap Hinges, Small Size
Price $ 85.00 pair

Reference # 500-138 1 pair available Note: Sale of this item is not complete until you receive confirmation from us Quantity:

Cast iron lift-off butt hinges in a small door or cupboard size measuring 2 1/2" high x 2" across the back when open, circa 1865.  This type of hinge is not reversible - this pair is right hand for a door hinged on the left.  Hinges are restored and in good condition.  One pair as pictured above.  Complete with slotted mount screws.

Cast Iron Lift-Off Butt Hinges
Price $ 35.00 pair 

Reference # 500-121 2 pair available Note: Sale of this item is not complete until you receive confirmation from us. Quantity:

Cast iron tight pin butt hinges signed S. G. Rosh., measuring 3 3/4" high x 3 1/4" across the back when open, circa 1865.  These hinges do not separate and are reversible for either hand door.  Hinges are restored and in good condition.  One pair pictured above - the second pair is pictured below.  Complete with slotted mount screws.

Rosh Cast Iron Butt Hinges
Price $ 45.00 pair

Reference # 500-129 1 pair available Note: Sale of this item is not complete until you receive confirmation from us. Quantity:

A pair of early wrought iron strap hinges, probably from Pennsylvania circa 1800, with side members in a pleasing flowing design.  Hinges measure 21" overall with the terminal measuring 15" and ending in the ball shape.  The side members have a spread of 7" high.  The hinges are nicely beveled and measure 1 3/4" high at the three knuckles.  Restored to a black finish.  There is some age appropriate wear on the joints as shown in photo. 

Early PA Wrought Iron Strap Hinges with Side Members
Price $ 175.00 pair

Reference # 500-037 1 pair available Note: Sale of this item is not complete until you receive confirmation from us Quantity:

Pair of early and nicely made wrought iron side hinges, from the 19th century, of German/Swiss influence - probably Pennsylvania in origin.  These hinges have an 8" spread and extend from the 1/2" high joint about 3".   Hinges do not come with pintles.  They are in a black finish that is not recent but is not an original finish either. 

Early Wrought Iron Side Hinges
Price $ 45.00 pair