[Rim (Box) Locks] [Mortise Locks] [Pocket Door Locks] [Thumb Latches] [Window Hardware] [Bolts] [Door Bells & Knockers] [Miscellaneous Hardware] (Hinges)
Original Antique Hardware Restored to Working Order

|
Note: Sale of this item is not complete until you receive confirmation from us. |
|
A pair of matching swivel style Eastlake candle sconces in cast brass, circa
1880, probably off a piece of furniture such as a dressing table or mirror, a
piano, sideboard, etc., although the brackets could be attached to a wall also.
The arms extend 6 1/8" and are 4" high overall. The back plate of the
bracket measures 2 1/4" high x 3/4" wide. The candle socket is 7/8" inside
diameter. Sconces are polished but not lacquered.
Swivel Eastlake Candle Sconces
Price $ 125.00 for pair

![]() |
Reference # 998-640
|
Matching pair of Victorian decorative stair rail brackets in cast iron, circa 1885, for a short railing. These brackets support a stairway railing and are mounted from the wall - measuring 5" high overall with a 2 3/4" extension from the wall. The railing mount is permanently attached to the bracket and swivels to adapt to the pitch of the railing. Restored and complete with mounting screws.
Victorian Stair Rail Brackets
Price $ 75.00 pair

![]() |
Reference # 998-4941 available
|
Victorian wall mount oil lamp holder, in decorative cast iron, signed B & H (Bradley & Hubbard) in the font, circa 1880, in original plated finish over cast iron. This armed holder swivels in the wall bracket allowing different positions for the lamp. Arm extends from the wall approximately 11 1/2" and is 12" high overall. The wall bracket (bottom row right) is not original to the lamp arm but fits it well and is of the same period. The bracket measures 4" high x 1 1/2" wide. The holder will accommodate a lamp font of 4" in diameter. Close-ups below show nice decorative details. Bracket does not come with a reflector which was mounted on the top pintle behind the lamp. Comes with mounting screws.
Bradley & Hubbard Wall Mount Oil Lamp Holder
Price $ 145.00

![]() |
Reference # 444-152
1 lot available |
An assorted lot of original early Japanese Tansu furniture hardware in wrought iron. Larger bail pulls pictured directly below measure 3 1/2" on center with a 1 1/4" drop. The back plate is 5 1/8" x 13/16". The lock second row below far right measures 4 3/4" deep x 2 3/4" high. The triangular lock pictured bottom row left measures 3 3/4" high x 2 3/4" deep. Assorted miscellaneous pieces are pictured bottom row right.
Early Japanese Original Tansu Wrought
Iron Hardware
Price $ 250.00 lot
Reference # 998-685
1 set available |
![]() |
Very heavy and well made push-pull style handles for a plate glass door. This set is variegated blue enamel over heavy cast bronze. The plates measure 10" high overall x 4 1/2" at the widest point and are 1/4" thick. The handle side wraps around and is open about 2" to allow for the hand grasp. The push plate installs flat against the door. Photos below show detail - photo far right shows handle side and flat push side back to back in mounted position with opening for door between. Manufactured by Techimex probably in the 1960's and exhibits Deco influence in beautifully made artistic door pulls of the time. Complete with all necessary mounts.
Blue Enameled Push-Pull Plates
Price $ 150.00

![]() |
Reference # 998-6761 pair available Note: Sale of this item is not complete until you receive confirmation from us. |
One heavy cast bronze decorative lever paired with a plain cast bronze door knob, circa 1890, on a one piece 5/16" spindle, probably off an interior door set. Lever measures 4" across x 3/4" thick. Extends from the door 2" and matches the bronze levers above. Very heavy and well cast high quality lever and knob.
Cast Bronze Lever & Knob
Price $ 45.00 pair

Reference # 998-63518 boxes of small size available
All medium size are SOLD |
![]() |
New old stock in original boxes and never used Anchor picture hooks, circa 1900. These bent steel hooks are adjustable and will stretch to accommodate easy mounting. Easily pushed into the wall, these hangers were the latest in modern picture hanging as they needed no wire or molding. Each hook will hold up to 50 pounds according to the package and to remove the hook just snap it off and leave the tack in the wall - no holes! Two anchors may be used on a picture if necessary. Small size boxes contain usually 21 hooks that measure 3/4" high overall x 5/8" across with a 3/8" tack. Medium size boxes contains usually 14 hooks measuring 1" high x 7/8" across with a 5/8" tack. Photo of original box which accompanies each ordered box is shown below.
Anchor Picture Hooks, New Old Stock
Price $ 2.50 each box