[Rim (Box) Locks] [Mortise Locks] [Pocket Door Locks] [Thumb Latches] [Window Hardware] [Bolts] [Door Bells & Knockers] [Miscellaneous Hardware] (Hinges)

Original Antique Hardware - New Arrivals

Items on this page were added on April 13,  2008

Reference # 100-656 Note: Sale of this item is not complete until you receive confirmation from us. Quantity:

          Unusually large wrought iron thumb latch in the Norfolk style from the second quarter of the 19th century, with bulbous decoration in the center of the handle.  Handle back plate measures 9 1/4" high x 2" while the handle itself is 4 3/4".  Side view of the flared swivel thumb press shows the curved bar lift that will accommodate a door up to 1 3/4" thick without modification.  The accompanying original bar set, pictured below, offers a 9 1/4" bar, a surface mount staple (2 7/8" x 15/16") and surface mount keeper (2 1/16" x 7/8").  Comes complete with slotted mounting screws.

Large Norfolk Thumb Latch, All Original
Price $ 175.00

Reference # 100-654 Note: Sale of this item is not complete until you receive confirmation from us. Quantity:

        Roggins thumb latch in cast iron manufactured circa 1875, with a different and more unusual bar set shown below.  Handle measures 7" x 1 7/8" across at widest and latch has a 3 7/8" grip opening.  Latch will all fit a door up to 1 1/2" thick and is restored, reversible, and complete, ready to install.  Parts include the handle pictured above and the latch set below with back plate with unusual configuration and unusual bar necessary for it, a staple, a privacy lock, and the jamb keeper.  Bar set measures approximately 3 3/4" across x 2 1/2" high.  When mounted, the end of the thumb lift protrudes through the door and rests under the bar to operate the bar latch and also acts as a grasp to lift the bar from the bar latch side.  The privacy lock is mounted above the bar in the top staple hole as shown below in the unlocked position.  This privacy lock can be swiveled downward against the bar so the latch cannot be opened by the handle on the other side.  Restored and complete with slotted screws.

Complete Restored Unusual Roggins Thumb Latch
Price $ 75.00

Reference # 100-657 1 available Note: Sale of this item is not complete until you receive confirmation from us. Quantity:

Early Victorian Blake style thumb latch in cast iron with ornamental cusps, manufactured circa 1860.  Handle measures 8"  x 2" at widest with inside grip opening of 4 1/4".  The original off-side bar set offers the 6 1/2" bar, ring, staple, and keeper as shown below.  This latch will fit a door up to 1 5/8" thick and is restored, reversible, and complete, ready to install.   When mounted, the thumb lift shown below right protrudes through the door and rests under the bar for operation and acts as a grasp to lift the bar from that side.  Restored and complete, comes with slotted mounting screws.

Complete Restored Ornamented Blake Style Thumb Latch
Price $ 85.00

Reference # 100-660 1 available Note: Sale of this item is not complete until you receive confirmation from us. Quantity:

A larger size Blake style thumb latch in cast iron manufactured circa 1885.  This Blake style latch was manufactured by most of the major hardware manufacturers for many years. Patented in 1842 - this type of thumb latch could still be found in some form in catalogs as late as 1940. Handle measures 8 1/8"  x 2 1/4" at widest with inside grip opening of 4 1/4".  The handle portion between the cusps is 3/4" wide.  The original off-side bar set offer the 6 1/2" bar, ring, staple, and keeper as shown below.  This latch will fit a door up to 1 3/8" thick and is restored, reversible, and complete, ready to install.   When mounted, the thumb lift shown below right protrudes through the door and rests under the bar for operation and acts as a grasp to lift the bar from that side.  Restored and complete, comes with slotted mounting screws.

Large Restored Blake Thumb Latch
Price $ 65.00

Reference # 500-022 1 pair available Note: Sale of this item is not complete until you receive confirmation from us. Quantity:

A pair of early antique wrought iron H L hinges from the late 18th or early 19th century. Hinges measure 10" high x 3" across the H and approximately 7 1/2" across the L extension.  The leaves are approx. 7/8".  The joints are in good condition with minor wear and measure 3 1/4" high at the knuckles - hinges are in an old finish, not newly restored. 

10" Wrought Iron H L Hinges
Price $ 125.00 pair

Reference # 500-024 1 pair available Note: Sale of this item is not complete until you receive confirmation from us Quantity:

Early original wrought iron H hinges from the late 18th or early 19th century.  Hinges measure 10" high x 3" across the H and 3" high at knuckle.  The joints are in good condition showing some wear - hinges are not newly restored and surface is in original aged patina. 

Wrought Iron H Hinges
Price $ 125.00 pair

Reference # 600-637 1 available Note: Sale of this item is not complete until you receive confirmation from us. Quantity:

  Antique cast iron surface mount barrel bolt, measuring 5 1/8" overall including keeper, from the 19th century.  The bolt itself measures 3 7/8"deep (without the keeper) x 1 3/4" high - keeper is 1 1/4" additional.  Bolt locks into position via the slots in the case as shown in photos and is reversible with slots both top and bottom so bolt can be turned in either direction.  Throw knob is iron and extends 1".   Bolt throws 1 1/4".  Restored and complete with mounting screws.

Cast Iron Barrel Bolt
Price $ 45.00