[Rim (Box) Locks] [Mortise Locks] [Pocket Door Locks] [Thumb Latches] [Window Hardware] [Bolts] [Door Bells & Knockers] [Miscellaneous Hardware] (Hinges)
Original Antique Hardware Restored to Working Order





Original Antique Thumb Latches - page 7
Reference # 100-6931 available Note: Sale of this item is not complete until you receive confirmation from us |
|
Early Suffolk style thumb latch in wrought iron, early 19th century, featuring nicely formed dominate upper cusp (2 1/2" at widest). Thumb press is a flat notches lift with a curved finger pull lift (shown below left) which will accommodate a door up to 1 1/4" thick. Handle measures 9 1/8" high x 2 1/2" at widest point across. Hand grasp is 3 1/2" with a 5/8" wide flat front. The accompanying wrought replacement bar set, pictured below right, has a 8" bar with a 1 3/4" high drive-in staple and a drive-in jamb keeper. Restored and complete - comes with mounting screws.
Wrought Iron Suffolk Thumb Latch
Price $ 155.00
![]()
|
|
Reference #
100-694
|
Early Suffolk style thumb latch in wrought iron, late 18th century, featuring nicely formed shaped cusps 2 1/4" wide. Thumb press is a flat pivot lift with a slightly curved lift (shown below left) which will accommodate a door up to 1" thick. Handle measures 8" high x 2 1/4" at widest point across. Hand grasp is 3 3/4" with a 3/4" wide flat handle front. The accompanying wrought replacement bar set, pictured below right, has a 8" bar with a 1 3/4" high drive-in staple and a drive-in jamb keeper. Restored and complete - comes with mounting screws.
Wrought Iron Suffolk Thumb Latch
Price $ 145.00
Reference # 100-566
|
|
Suffolk style thumb latch in wrought iron circa 1760, featuring arrow shaped cusps. Thumb press is flat with a notched lift that is nicely curved (shown below center) which will accommodate a door up to 1 5/8" thick. Handle measures 14" high x 2 1/2" at widest point across. Hand grasp has a 5 1/2" grip opening and is nicely worked into a 6" flat handle measuring 1" wide. The accompanying replacement bar set, below right, has a 7 3/4" bar, 1 3/4" high drive-in staple, and a drive-in keeper. Restored and complete - comes with mounting screws.
18th Century Wrought Iron Suffolk Thumb Latch
Price $ 260.00
Reference # 100-5561 available
|
|
Antique Suffolk thumb latch in wrought iron from the early 1800's, featuring a dominant upper cusp and a smaller lower cusp. Excellently executed handle measures approximately 10 3/4" high overall x 2" at widest on upper cusp and 2 1/4" widest at the bottom cusp - hand grasp is 5" inside and is rounded. Side view of flat thumb press below shows the straight pivot lift to grasp on the offside that will accommodate a door up to 1 3/8" thick. The accompanying bar set, pictured below, is a wrought iron replacement set with a 7 3/4" bar, 1 3/4" high drive-in staple, and a drive-in keeper. Comes complete with screws.
Wrought Iron Suffolk Thumb Latch
Price $ 245.00
![]()
|
|
Reference # 100-564 |
Antique Suffolk thumb latch in wrought iron from the 1700's, featuring unusual diamond shaped cusps with a squared handle. Excellently executed, the handle measures approximately 9 1/2" high overall x 4" at widest on upper cusp and 3" widest at the bottom cusp. The hand grasp itself is 6" inside and is hammered into an unusual square shape using six sides. Side view of dished thumb press below shows the nicely curved notched lift to grasp on the offside - will accommodate a door up to 1 3/4" thick. The accompanying bar set, pictured below, is a wrought iron replacement set with a 7 3/4" bar, 1 3/4" high drive-in staple, and a drive-in keeper. Comes complete with screws.
Unusually Shaped Suffolk Thumb Latch
Price $ 245.00
![]()
Reference # 100-5591 available
|
|
Large Suffolk swivel style thumb latch in wrought iron from circa 1800, featuring arrow shaped cusps with the thumb press below the cusp. Thumb press is flat with a pivot lift slightly curved as shown below which will accommodate a door up to 1 1/2" thick. Handle measures 10" high x 2 5/8" at widest point across the cusp. Hand grasp has a 3" grip opening and is nicely worked into a nice wide flat handle measuring 3/4" wide with double incised decorative lines. The accompanying bar set, pictured below, is a wrought iron replacement set with a 7 3/4" bar, 1 3/4" high drive-in staple, and a drive-in keeper. Comes complete with screws.
Wrought Iron Suffolk Thumb Latch, Circa 1800
Price $ 200.00
![]()
Reference # 100-6721 available Note: Sale of this item is not complete until you receive confirmation from us. |
|
A Suffolk thumb latch in wrought iron from the early 19th century. Thumb press is flat below the cusp and has a straight pivot lift which will accommodate up to a 1" thick door. Lift can be extended to fit thicker door upon request in the Comments Section. Handle measures 7 1/2" high x 1 3/8" wide rounded cusps. Hand grasp has a 3 3/4" grip opening and is worked into a wide flat handle measuring 3/4" wide. Accompanied by a our own replacement bar set, pictured below, with a 6 1/2" bar, a 1 1/2" high drive-in staple, and drive-in keeper measuring 2 1/2" overall and extending approximately 1" when mounted. Comes complete with screws.
19th Century Wrought Iron Suffolk Thumb Latch
Price $ 125.00
![]()