[Rim (Box) Locks] [Mortise Locks] [Pocket Door Locks] [Thumb Latches] [Window Hardware] [Bolts] [Door Bells & Knockers] [Miscellaneous Hardware] (Hinges)

Restored Antique Window Hardware Page 10

Reference # 641-023 Note: Sale of this item is not complete until you receive confirmation from us. Quantity:

Vintage new old stock iron casement fasteners or catches manufactured by Lawrence Brothers, Inc. Sterling, Illinois.  These catches have never been used and are in their original antique copper finish and measure 1 7/8" x 1" on the base.  The operating arm is 2 1/8".  The keeper included is a side mount rim style, 1" high and extending about 3/4" when mounted.  Fastener extends 1 1/4" from casement when mounted.  Each fastener is wrapped in tissue with original screw packs. 

New Old Stock Vintage Casement Fasteners
Price $ 6.00 each

Reference # 641-024 18 available Note: Sale of this item is not complete until you receive confirmation from us. Quantity:

Vintage new old stock iron casement fasteners or catches manufactured by Lawrence Brothers, Inc. Sterling, Illinois.  These catches have never been used and are in their original applied black finish and measure 1 7/8" x 1" on the base.  The operating arm is 2 1/8".  The keeper included is a side mount rim style, 1" high and extending about 3/4" when mounted.  Fastener extends 1 1/4" from casement when mounted.  Each fastener is wrapped in tissue with original screw packs. 

New Old Stock Vintage Casement Fasteners
Price $ 6.00 each

Reference # 641-022 12 available Note: Sale of this item is not complete until you receive confirmation from us. Quantity:

Vintage new old stock iron casement fasteners or catches manufactured by Lawrence Brothers, Inc. Sterling, Illinois.  These catches have never been used and are in their original applied black finish and measure 1 7/8" x 1" on the base.  The operating arm is 2 1/8".  The keeper included is a mortise style mount 2 1/2" high x 3/4".  Fastener extends 1 1/4" from casement when mounted.  Each fastener is wrapped in tissue with original screw packs. 

New Old Stock Vintage Casement Fasteners
Price $ 6.00 each

Reference # 997-059 2 available Note: Sale of this item is not complete until you receive confirmation from us. Quantity:

Original steel and cast iron transom rods or adjusters manufactured by the Reading Hardware Co. and dated Pat. June 6, 1899.  With remnants of the original plated finish, rods measure 29" overall.   Rods are in very good condition and are in working order.

Original Circa 1899 Transom Rods/Adjusters
Price $ 65.00 each

Reference # 600-713 1 available Note: Sale of this item is not complete until you receive confirmation from us. Quantity:

Wrought  iron exterior shutter slide bolt from the early to mid 19th century.  The bolt side measures 6 3/4" x 2 1/4" while the keeper is additional 4" x 2 1/4".  The bolt itself is thrown via the iron finger slide - throw is 2 1/2".  Restored to black finish and complete with mounting screws.

Exterior Wrought Iron Shutter Bolt
Price $ 25.00

Reference # 600-714 2 available Note: Sale of this item is not complete until you receive confirmation from us. Quantity:

Wrought  iron exterior shutter slide bolt from the early to mid 19th century.  The bolt side measures 8 3/4" x 2" while the keeper is additional 3 3/4" x 2".  The bolt itself is thrown via the iron finger slide - throw is 3 3/4".  Restored to black finish and complete with mounting screws.

Exterior Wrought Iron Shutter Bolt
Price $ 25.00 each

Reference # 600-712 1 available Note: Sale of this item is not complete until you receive confirmation from us Quantity:

Early cast  iron exterior shutter slide bolt from the early to mid 19th century.  The bolt side measures 6 1/4" x 2 1/8" while the keeper is additional 3 1/4" x 2 1/8".  The bolt itself is thrown via the iron finger slide - throw is 2 1/2".  Restored to black finish and complete with mounting screws.

Exterior Cast Iron Shutter Bolt
Price $ 20.00

Reference # 600-711 1 available Note: Sale of this item is not complete until you receive confirmation from us. Quantity:

Early cast  iron exterior shutter slide bolt from the early to mid 19th century.  The bolt side measures 4 7/8" x 2" while the keeper is additional 2 5/8" x 2".  The bolt itself is thrown via the iron finger slide - throw is 1 3/4".  Restored to black finish and complete with mounting screws.

Exterior Cast Iron Shutter Bolt
Price $ 20.00