[Rim (Box) Locks] [Mortise Locks] [Pocket Door Locks] [Thumb Latches] [Window Hardware] [Bolts] [Door Bells & Knockers] [Miscellaneous Hardware] (Hinges)

Ed Donaldson Hardware Restorations

Restored Antique Window Hardware Page 11


   
Reference # 640-901

1 set of 16 pulls & buttons available

Note
: Sale of this item is not complete until you receive confirmation from us.

Quantity:

Vintage crocheted shade pull rings in variegated shades of  ivory/beige complete with original celluloid buttons.  The buttons are screwed half way into the center of the shade base strip - the pull cord was looped over the screw and out through the slot.  The button was screwed down with the cord by grasping same close to the button - it was not necessary to screw the button down tight.  The crocheted rings measure approximately 1 1/2" diameter.  These rings are circa 1930's and have never been used - new old stock.

Crocheted Shade Ring Pulls w/Buttons
Price $ 24.00 set of 16

   


Reference # 640-899


Note
: Sale of this item is not complete until you receive confirmation from us.

Quantity:

Vintage crocheted shade pull rings in ivory complete with original celluloid buttons.  The buttons are screwed half way into the center of the shade base strip - the pull cord was looped over the screw and out through the slot.  The button was screwed down with the cord by grasping same close to the button - it was not necessary to screw the button down tight.  The crocheted rings measure approximately 1 1/2" diameter.  These rings are circa 1930's and have never been used - new old stock.

Crocheted Shade Ring Pulls w/Buttons
Price $ 18.00 set of 12

 


Reference # 640-904

5 sets of 1 dozen pulls available

Note
: Sale of this item is not complete until you receive confirmation from us.

Quantity:

Vintage crocheted shade pull rings in off-white - no buttons included.  We have five sets of one dozen pulls each.  The crocheted rings measure approximately 1 1/2" diameter.  These rings are circa 1930's and have never been used - new old stock.

Crocheted Shade Ring Pulls
Price $ 15.00/dozen

   


Reference # 640-903

25 pulls w/10 buttons available

Note
: Sale of this item is not complete until you receive confirmation from us

Quantity:

Vintage crocheted shade pull rings in taupe complete with original some metal buttons.  The group consists of 25 pulls with 10 matching buttons.  The buttons are screwed half way into the center of the shade base strip - the pull cord was looped over the screw and out through the slot.  The button was screwed down with the cord by grasping same close to the button - it was not necessary to screw the button down tight.  The crocheted rings measure approximately 1 1/2" diameter.  These rings are circa 1930's and have never been used - new old stock.

Crocheted Shade Ring Pulls
Price $ 30.00 all


Reference # 640-906

3 sheets available of 72 buttons each
Note
: Sale of this item is not complete until you receive confirmation from us.

Quantity:

Higbee tassel and ring pull buttons, light weight metal buttons (3/4" diameter) with 1/4" screws.  New old stock - never used.  Buttons are still mounted on original sheets - one sheet holds 72 (1/2 gross) buttons, 36 buttons on front and back.  Two sheets are filled each with 72 dark green buttons, one sheet has 5 dark blue and 67 dark green.  There are 216 buttons in all available.

Tassel & Ring Pull Buttons
Price $ 18.00 per sheet (72 buttons)


Reference # 640-905

1 tassel available

Note
: Sale of this item is not complete until you receive confirmation from us

Quantity:

Vintage crocheted tassel shade pull in a light golden wheat color - complete with celluloid button.  Measuring 4 1/2" overall.  This tassel is new old stock for the 30's and has never been used.

Crocheted Shade Tassel Pull
Price $ 12.00


Reference # 640-911

1 Lot of 4 adjusters available

Note
: Sale of this item is not complete until you receive confirmation from us.

Quantity:

As found - not restored  One lot of 4 casement adjusters from the early 20th century, original brass plated finish over cast iron.  Bars measure 12".  Three adjusters match each other (bottom three in photo above) with 7/8" diameter knobs shown in close-up below right and bottom row left - the 4th adjuster (top) has a 11/16" knob shown in close-up bottom row rightMount plates under the knob are 2 1/4" x 7/8".

Lot of 4 Casement Adjusters
Price $ 35.00 Lot

     
 



Previous page