[Rim (Box) Locks] [Mortise Locks] [Pocket Door Locks] [Thumb Latches] [Window Hardware] [Bolts] [Door Bells & Knockers] [Miscellaneous Hardware] (Hinges)

Ed Donaldson Hardware Restorations
Restored Antique Window Hardware page 2


Reference # 640-889

2 available

Note
: Sale of this item is not complete until you receive confirmation from us.

Quantity:

   Early swing arm style sash locks with a patent dates imprinted of  1878 & 1879, in cast iron with some ornamentation and bronze pivot caps.  Locks measure 1 1/2" diameter at the base.  The keeper is 2 5/16" x 3/4" wide to mount.  The rounded  hinged toggle on the back of the lock releases the swing arm into the catch on the keeper to lock and out of the keeper to unlock. The arm extends 1 1/2" from the center pivot.  Restored and complete - comes with slotted wood screws.

1870's Sash Locks
Price $ 35.00 each


Reference # 640-888

7 available
Note
: Sale of this item is not complete until you receive confirmation from us

Quantity:

 

Early swing arm style sash locks with a patent dates imprinted of  1878 & 1879, in plain cast iron.  Locks measure 1 1/2" diameter at the base.  The keeper is 2 3/8" x 3/4" wide to mount.  The rounded  hinged toggle on the back of the lock releases the swing arm into the catch on the keeper to lock and out of the keeper to unlock. The arm extends 1 1/2" from the center pivot.  Restored and complete - comes with slotted wood screws.

1870's Sash Locks
Price $ 35.00 each


Reference # 640-766

1 pair available

Note
: Sale of this item is not complete until you receive confirmation from us

Quantity:

Victorian window or sash lift in decorative cast iron, manufactured circa 1885.  Lift measures 2 1/8" wide x 1 1/2" high.  Restored and ready to install.  Complete with screws.

Victorian Sash Lifts
Price $ 24.00 for 2


Reference # 640-496

7 pair available


Note
: Sale of this item is not complete until you receive confirmation from us.

Quantity:

Antique cast iron grape cluster shutter dogs manufactured during the last half of the 19th century.  Shutter dog overall measures 5 1/4" high x 2 3/4".   These dogs are mounted on drive-in spikes for use on a brick home.  Spikes vary from 6 1/2" to 8" in length.  Restored to a black finish suitable for exterior use - may be used as is or ready for your final painting to match your home.

Grape Shutter Dogs, Drive-In Style
Price $ 45.00 each pair


Reference # 640-908

10 available

Note
: Sale of this item is not complete until you receive confirmation from us.

Quantity:

 

Circa 1880 Victorian sash lifts in cast bronze.  Measuring 1 1/2" wide x 1 3/8" high overall (including the raised finger lift).  Restored and complete with screws.

Bronze Victorian Sash Lifts
Price $ 15.00 each


Reference # 640-758

1 available

Note
: Sale of this item is not complete until you receive confirmation from us

Quantity:

A typical early forged iron exterior shutter bolt, circa 1860.  What is not typical is that this bolt is still in the original state after manufacturing and has never been used.  Bolts were made in one piece with the keeper attached.  The bolts were sold this way and when the home owner used it, they detached the keeper from the bolt.  There is a line incised into the metal (can be seen in the photos) where the keeper is to be detached.  This bolt and keeper were never detached and are still in the original single piece.  Bolt measures 6 3/4" x 1 3/4" - keeper measures 1 3/4" x 3 1/8".  Overall length is 9 7/8".

Forged Iron Exterior Shutter Bolt, Original Condition
Price $ 35.00



window